

consegnamo salvo venduto in 2/4 giorni
chiedere in tutti i casi disponibilità del momento ed offerta dedicata ,
con accessori e ampliamenti !
Frequency coverage (Unit: MHz) | Receiver |
0.030–199.999* |
|
---|---|---|---|
Transmitter |
1.810–1.999 |
||
Mode |
USB, LSB, CW, RTTY, AM, DV, FM, WFM (Rx only) |
||
No. of memory channels |
Memory channels: 500 channels (100 groups) Scan edges: 25 channels Call channels: 4 channels (2 channels x 2 bands) |
||
Antenna connector | BNC connector (50Ω) (One connector for all bands) | ||
Power supply requirement |
13.8 V DC ±15% (with external power supply) 7.4 V DC (with BP-272) |
||
Operating temp. range |
–10°C to +60°C; +14°F to +140°F |
||
Frequency stability |
Less than ± 0.5 ppm (–10°C to +60°C; 14°F to 140°F) |
||
Frequency resolution |
1 Hz |
||
Current drain | 13.8 V DC | 7.4 V DC | |
TX (Max. power) |
Less than 3 A (10 W) |
Less than 2.5 A (5 W) | |
RX (Max. audio) | 0.5 A (typical) | 0.8 A (typical) | |
RX (Standby) | 0.3 A (typical) | 0.5 A (typical) | |
Dimensions | 200×83.5×82 mm (W×H×D, projections not included) | ||
Weight | 1.1 kg (approximate; including BP-272) |
* Some frequency bands are not guaranteed.
Output power |
13.8 V DC |
7.4 V DC | |
---|---|---|---|
SSB/CW/RTTY/FM/DV |
0.1 to 10 W |
0.1 to 5 W | |
AM | 0.025 to 2.5 W | 0.025 to 1.25 W | |
Modulation system |
SSB : Digital PSN modulation AM : Digital low power modulation FM : Digital reactance modulation DV : Digital GMSK modulation |
||
Spurious emissions |
Less than −50 dB (HF) Less than −60 dB (50 MHz) Less than −60 dB (144/430 MHz) |
||
Carrier suppression |
More than 50 dB |
||
Unwanted sideband |
More than 50 dB |
Receiver system | 0.030 to 24.999 MHz |
RF Direct Sampling |
||||
---|---|---|---|---|---|---|
25.000 MHz and above |
Down Conversion IF Sampling |
|||||
Intermediate frequencies |
25.000 and above:38.85 MHz±0.5 MHz |
|||||
Sensitivity (HF: Preamp-1 ON, 50 MHz: Preamp-2 ON, 144/430 MHz: Preamp ON) |
0.500 to 1.799 MHz |
1.800 to 29.999 MHz | 50 MHz | 144/430 MHz | ||
SSB/CW(10 dB S/N) | - | 0.20 μV | 0.15 μV | 0.11 μV | ||
AM(10dB S/N)13.0 μV |
13.0 μV |
2.0 μV | 1.0 μV | 1.0 μV | ||
FM(12 dB SINAD) |
0.5 μV (28.000 to 29.700 MHz) |
0.25 μV | 0.18 μV | |||
DV(1% BER)(PN9) |
1.0 μV (28.000 to 29.700 MHz) |
0.63 μV | 0.35 μV | |||
Sensitivity for RED version (HF: Preamp-1 ON, 50 MHz: Preamp-2 ON, 144/430 MHz: Preamp ON) | 1.8–2.999 MHz | 3.0–29.995 MHz | 50 MHz | 144/430 MHz | ||
SSB (BW=2.4 kHz) | 10 dBμV emf | 0 dBμV emf | –6 dBμV emf | –6 dBμV emf | ||
AM (4 kHz, 60% modulation) | 16 dBμV emf | 6 dBμV emf | 0 dBμV emf | 0 dBμV emf | ||
FM (7 kHz, 60% modulation) | 0 dBμV emf (28.000 to 29.700 MHz) | –6 dBμV emf | –6 dBμV emf | |||
Selectivity (Filter: SHARP) | SSB(BW=2.4 kHz) |
More than 2.4 kHz/-6 dB Less than 3.4 kHz/-40 dB |
||||
CW(BW=500 Hz) |
More than 500 Hz/-6 dB Less than 700 Hz/-40 dB |
|||||
RTTY(BW=500 Hz) |
More than 500 Hz/-6 dB Less than 800 Hz/-40 dB |
|||||
AM(BW=6 kHz) |
More than 6.0 kHz/-6 dB Less than 10 kHz/-40 dB |
|||||
FM(BW=15 kHz) |
More than 12.0 kHz/-6 dB Less than 22 kHz/-40 dB |
|||||
DV(12.5 kHz spacing) |
Less than -50 dB |
|||||
Spurious and image rejection ratio (SSB/CW/AM/FM) |
HF: More than 70 dB* |
|||||
Audio output power | Internal SP |
More than 530 mW (12 Ω load at 10% distortion) |
||||
External SP |
More than 200 mW (8 Ω load at 10% distortion) |
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL 810G | |
Method | Procedure | |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Vibration | 514.6 | I |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
You might also like